Topsoil Calculator
Estimate topsoil in cubic yards and tons for garden beds, lawn establishment, and raised beds.
Estimated weight uses your editable bulk density. Default: 75 lb/ft³ (about 1,201 kg/m³). Actual topsoil density varies with moisture and blend; confirm the supplier's value for weight-based orders.
Optional: leave blank for standard 0.75 ft³ and 1.5 ft³ comparisons. If entering a size, use the bag's printed volume, not its weight.
Help improve this calculator
Report an issue or suggest an improvement.
For: Topsoil Calculator
How to Use
- Measure your area - enter length and width, or switch to an already measured area for irregular beds.
- Choose depth - about ½" for an established lawn topdressing, 4–6" for new lawns or garden preparation, and 8–12" for raised beds.
- See bags, yards and estimated weight - compare 0.75 ft³ and 1.5 ft³ bags or enter the supplier labeled bag volume. US short tons are an estimate based on your editable bulk density, not a measured delivery weight.
- Add 10% waste - topsoil settles after watering. Account for settling and spillage.
- Order screened soil - screened topsoil is free of rocks and debris. Unscreened is cheaper but lumpy.
One cubic yard of topsoil covers 108 square feet at 3 inches deep, or 54 square feet at 6 inches. At the editable example density of 75 lb/ft³, a cubic yard weighs about 2,025 lb (1.01 US short tons); wet or differently blended topsoil can weigh more or less. Check your vehicle payload rating rather than assuming a pickup can carry a full yard. For a new lawn plan on 4-6 inches; for topdressing an existing lawn, half an inch is plenty. Enter your area and depth above for cubic yards, tons, and bag counts.
Topsoil Depth by Job
How Much Topsoil Do I Need?
The depth of topsoil depends on what you're growing. Grass needs a minimum 4 inches of quality topsoil to establish strong roots. Vegetable gardens and flower beds perform best with 6 inches. Raised beds are typically filled 8 to 12 inches deep. For trees and shrubs, the planting hole should be backfilled with a mix of native soil and topsoil. For bulk grade changes below the growing layer, cheaper fill dirt does the heavy lifting - topsoil goes on top.
Quality matters as much as quantity. Good topsoil should be dark, crumbly, and smell earthy - not sour. Ask your supplier if the topsoil is screened (rocks and debris removed) and whether it contains compost. A 60/40 topsoil-compost blend is ideal for gardens and new lawns.
Topsoil Depth Guidelines
Match the depth to your project for the best results:
| Project | Depth | Notes |
|---|---|---|
| Established lawn topdressing | ¼–½ in | Rake a thin layer through the grass; do not bury the blades |
| New lawn from seed | 4 in | Minimum for healthy root development |
| New lawn from sod | 4–6 in | Grade and compact before laying sod |
| Flower beds | 6 in | Amend with compost for best results |
| Vegetable garden | 6–8 in | Deep roots need deep soil |
| Raised beds | 8–12 in | Use a topsoil/compost blend |
For raised beds, a popular fill recipe is 60% topsoil, 30% compost, and 10% perlite or coarse sand for drainage.
How Much Soil for a Raised Bed
A raised bed is just a box to fill, so use the calculator with the bed's inside length and width and set the depth to the bed's height in inches. A common 8 × 4 ft bed filled 12 inches deep needs 32 cubic feet - about 1.2 cubic yards, or roughly 22 bags of 1.5 cubic feet. Measure the inside dimensions rather than the outside, and round up, since fresh soil settles.
Don't fill a bed with topsoil alone. A reliable mix is about 60% quality topsoil, 30% compost, and 10% perlite or coarse sand for drainage - work out the total volume here, then split it by those percentages. Most vegetables root happily in 8 to 12 inches of soil; root crops like carrots want at least 10.
Topsoil Coverage Quick Reference
| Area | 4" Deep | 6" Deep | 12" Deep |
|---|---|---|---|
| 100 ft² | 1.23 yd³ (1.25 US tons) | 1.85 yd³ (1.88 US tons) | 3.70 yd³ (3.75 US tons) |
| 250 ft² | 3.09 yd³ (3.13 US tons) | 4.63 yd³ (4.69 US tons) | 9.26 yd³ (9.38 US tons) |
| 500 ft² | 6.17 yd³ (6.25 US tons) | 9.26 yd³ (9.38 US tons) | 18.52 yd³ (18.75 US tons) |
| 1,000 ft² | 12.35 yd³ (12.50 US tons) | 18.52 yd³ (18.75 US tons) | 37.04 yd³ (37.50 US tons) |
Base quantities before overage, at an illustrative bulk density of 75 lb/ft³. US short tons change with the selected supplier density; add any separate overage when ordering.
Formulas
Volume and weight:
Cubic yards = Volume ÷ 27
Estimated US short tons = Volume with overage × selected density (lb/ft³) ÷ 2,000
Bags to purchase = Round up [Volume with overage (ft³) ÷ labeled bag volume (ft³)]
The 75 lb/ft³ default is an illustrative bulk-density input, not a measured supplier value. For weight-based ordering, replace it with the supplier’s relevant bulk density, including moisture condition. Bag counts use labeled bag volume, not bag weight.
Topsoil cost by type and quantity (2026)
| Topsoil type | Per cubic yard bulk | Per 0.75 ft³ bag | Coverage at 4 in depth |
|---|---|---|---|
| Budget unscreened | $10-$20 | $3-$5 | ~100 sq ft per yd3 |
| Standard screened loam | $15-$30 | $4-$6 | ~100 sq ft per yd3 |
| Premium screened topsoil | $25-$45 | $6-$9 | ~100 sq ft per yd3 |
| Organic compost blend | $30-$60 | $7-$12 | ~100 sq ft per yd3 |
| Garden mix (topsoil + compost) | $35-$70 | $8-$14 | ~100 sq ft per yd3 |
Bulk delivery typically $50-$150 per load (10-15 cubic yards). Bags cost roughly 3-5x more per cubic yard than bulk - only worth it for small touch-up fills under half a cubic yard. A truckload (12 yd3) covers about 1,200 sq ft at 4 inches deep. Quality matters: avoid fill-dirt sold as topsoil.
Related Calculators
After You Know Your Yardage
Topsoil is usually step one of a bigger job. From here:
Topsoil goes down first - then layer mulch or seed on top. See our complete landscaping calculator collection for compost, mulch, and sod.